Ignition / Electrical

Elite PRO Direct Plug-in Wideband Hardware Pack, Length: 1.2m (4'), Includes: LSU 4.9 sensor, Terminated harness and weld-on sensor bung.

Wideband Sensor only - Bosch LSU 4.9, (includes factory calibration resistor connector).

Haltech Wideband O2 Sensor (Bosch LSU 4.2)

NTK LZA08-H5 Wideband Sensor - Genuine NTK sensor modified by Haltech to improve sensor longevity and accuracy at extremely rich air to fuel ratios...

Stainless Steel Single Channel Hall Effect Sensor, Thread: 3/8 24 TPI, Suits: Wheel Speed, Crank/Cam etc.; Includes: Matching set of Deutsch DTM 3 ...

Red Single Channel Hall Effect Sensor; Thread: M12x1.0; Suits: Wheel Speed, Crank/Cam etc.; Includes: Matching set of Deutsch DTM 3 connectors (HT-...

GT101 Style High Frequency Hall Effect Sensor, Size: 18mm Diameter, Suits: Wheel Speed, Crank/Cam etc.; Includes: Matching set of Deutsch DTM 3 con...

Throttle Position Sensor - Motorsport Contactless, Size: 8mm D-Shaft, Suits: CW & CCW Rotation, Includes: Matching Set of Deutsch DTM-3 Connect...

Haltech Throttle Position Sensor (Grey/8mm D-Shaft/CW & CCW Rotation)

Oil Temperature sensor High Range, Thread: 1/8 NPT 27TPI, Includes: Matching Bosch EV1 plug & pins., Notes: 150 deg C (302 F) Max reading.

Coolant Temp Sensor - 1/8 NPT Thread (inc plug & pins).

Coolant Temp Sensor - Large Thread, Thread: 3/8 NPT 18TPI, Includes: Matching Delphi plug and pins., Notes: 127 deg C (260 F) Max reading.

Coolant Temp Sensor - Small Thread, Thread: M12 x 1.5, Includes: Matching Delphi plug and pins., Notes: 127 deg C (260 F) Max reading.

Haltech Air Temp Sensor 1/8 NPT Thread

Air Temp Sensor - Large Thread, Thread: 3/8 NPT 18TPI, Includes: Matching Delphi plug and pins., Notes: 127 deg C (260 F) Max reading.

Air Temp Sensor - Small Thread, Thread: M14 x 1.5, Includes: Matching Delphi plug and pins., Notes: 127 deg C (260 F) Max reading.

Haltech 5 Bar Motorsport Stainless Steel Diaphragm MAP Sensor 1/8 NPT w/Plug & Pins

4 Bar Motorsport MAP Sensor, Includes: Matching male Deutsch DTM-3 Connector (HT-031001).

3 Bar Motorsport MAP Sensor, Includes: Matching male Deutsch DTM-3 Connector (HT-031001).

Haltech 7 Bar TI MAP Sensor 1/8 NPT w/Plug & Pins/-4 AN & 5mm Hosetail Adaptors

Manifold Absolute Pressure Sensor

1 Bar GM MAP Sensor, Includes: Matching plug and 3 Pins.

This IAC Valve is a direct replacement for the IAC found on EZ 1.0 and EZ 2.0 Throttle Bodies. This IAC valve has 4 metripack design male terminals.

Ridetech 30 Amp Relay for LevelTow Compressor System

Analog control panel wiring harness, 10 feet long. Connects RidePro valve to electric rocker switches.

30 amp relay with prewired relay socket.

Haltech NEXUS Rebel LS Corvette Pedal Adaptor

Haltech NEXUS Rebel LS 6-Pin DBW Adaptor

IC-7 OBDII to CAN - 1400mm / 55 In. - Suits Dash.

CAN Adaptor Loom (DTM-4 to Minifit Jr) - Suits Microtech.

CAN Adaptor Loom (DTM-4 to JST 5pin) - Suits Link PlugIn ECU's- Used to connect supported Haltech CAN devices to the CAN port found on the Link Plu...

CAN Adaptor Loom (DTM-4 to 6 pin Circular Connector ) - Used to connect supported Haltech CAN devices to the 6 Pin circular connector CAN port foun...

CAN Adaptor Loom (DTM-4 to Flying leads ) - Used to connect supported Haltech products to the CAN and power pins found on the main connector of man...

CAN Cable - DT-4 to DTM-4 Adaptor- Suits CAN Keypad - 200mm.

Haltech Elite CAN Cable DTM-4 to 8 Pin Black Tyco 300mm (12in)

Haltech Elite CAN Cable DTM-4 to 8 Pin Black Tyco 150mm (6in)